Backyard Installs
January 29, 2008
As the owner of a shop I would like to make a comment to any customers that are debating on whether to have their friend hook up their car stereo or have a professional do it.
If you choose NOT to have your stereo installed at a store, please be aware of the following:
Many times customers will say they are unhappy with how their stereo sounds or that it does not work. We have found 99% of the time THAT IT IS INSTALLED INCORRECTLY. If you find you are in this situation and you swear it is hooked up right, bring your car and the equipment to the store immediately. DO NOT pack it back up in the box ! (We would only test it and tell you it’s fine further upsetting you).
Example: Customer swears his friend knows what he is doing. Says it sounds like $h&%. Customer is mad and brings stereo to the store. We find another bad install (The expert friend hooked it up wrong).
Customer is now embarrassed and mad at friend. DON”T let this happen to you. Your friend can blow the ground trace on your cd player, blow a $2,500 airbag, cause your amp to overheat and ruin it, catch your car on fire, etc!
Also, there are a million different ways to adjust crossover settings, dial in EQs, place speakers in a vehicle properly, etc! Most CUSTOMER installed stereos are hearing 50% of what the equipment is capable of! Trust a professional… You get what you pay for!
Posted by Lou Norman Owner of Enormis Mobile Specialties in Erie, PA Enormis was voted one of the “Top 50 Mobile Electronics Retailers in the US” www.enormis.net louis@enormis.netWhat are Component Speakers and Why Should I Buy Them
January 27, 2008
Today’s vehicles come from the factory with decent sounding systems. I say decent because that is what they are. Todays factory systems sound better than they did 10 years ago, but there is still a LOT of room for improvement.
Back in the early 90’s when I started my shop, we sold tons of coaxials and triaxials. Simply described, these are speakers that have a woofer, midrange and tweeter all in one unit. They are bolted together and have a minimal crossover typically hot glued to the back of the basket. By taking out the customer’s dual paper cone speaker and installing a coaxial, we could make a vast improvement in sound quality.
That is not so true anymore. The manufacturers are putting better speakers in their vehicles. In order to achieve the same amount of improvement, we now offer our customers Component Speaker packages. Component Speakers are typically 2 separate speakers and an outboard crossover. A common Component Speaker setup includes two 6.5″ woofers, two 1″ tweeters and a pair of crossovers the size of a pack of cigars.
Speaker quality is tremendously important when selecting a good component set. Just as important is the role of the outboard crossover. Because there is significantly more room to work with, better quality components can be used within the crossover unit. By using better parts, the frequencies going to the woofer and tweeter can be better controlled and separated. This allows for vastly better frequency response, sound quality and power handling.
Installation of a component set is definitely more complex. A location must be found for the crossover and in many cases, additional wires need to be run into the doors. Some component sets allow for the tweeter to be mounted into it’s customary location in the center of the woofer. Other sets require the tweeter to be mounted elsewhere. This may mean the cutting of a door panel, the construction of an a pillar pod or perhaps surface mounting.
When considering a speaker upgrade, consult with your local specialist who, undoubtedly has several pair of component speakers on a working display for you to audition. They can make installation recommendations based on previous experiences. And when it comes time to install the set, they can do the job properly the first time to ensure that you receive the most from your investment in sound quality.
What about the cost? Component speaker generally start out at the price of a decent set of coaxials and go up in price from there. The sky is the limit with components. Installation ranges from slightly more than a coaxial install to many hundreds of dollars for a customer fiberglassed door pods.
