Car Audio Integration: Why It Matters for Your Upgrade
Advertisement
Subscribe
Proper Integration is Critical to Car Audio Upgrades
Integration

Proper Integration is Critical to Car Audio Upgrades

A buddy offers to install a new radio and amplifier on the cheap. A week later, the amplifier has burned out, the seatbelt chime no longer sounds and the steering wheel buttons do nothing. The new speakers may even play quieter than the factory ones did. Each of these problems traces back to integration: how new equipment connects to and works with the electronics already in the vehicle. Even many vehicles a decade or more old have electronics tied into the audio system, so an upgrade demands knowledge of the vehicle as well as the equipment. Here’s what every vehicle owner should understand about integrating with a factory system, and what’s lost when the job is done poorly.

The Complexities of Modern Integration

In most modern vehicles, the factory radio connects to other vehicle systems through a data network, and replacing it without the right interface can disable functions the driver relies on. That network is the CAN bus (Controller Area Network), which the vehicle’s electronics use to communicate. The radio is called the head unit because it sits at the head of the audio signal chain, and in many vehicles it also links to other systems. The functions most often lost in a radio swap include:

• Warning chimes. Seatbelt, headlight reminder and parking sensor alerts often play through the factory audio system. Without the right interface, they can stop sounding entirely.

• Climate controls. In some vehicles, heating and air conditioning operate through the factory touchscreen.

• Backup cameras. The image often displays on the factory screen, so a new head unit needs a way to receive it.

• Steering wheel controls. These buttons send commands over the network and need an interface to work with a new radio.

Proper Integration is Critical to Car Audio Upgrades
An interface module such as the iDatalink Maestro RR2, paired with a harness made for the vehicle, lets a new radio keep factory features like steering wheel controls, warning chimes and the backup camera.

Factory anti-theft systems and remote start can also communicate over the CAN bus, so a technician makes sure they keep working after the upgrade. To preserve these functions, the technician may add interface modules, which translate signals so a new head unit can communicate with existing systems, along with a vehicle-specific dash kit. Many of these modules must be programmed for the exact make, model and trim level, since the same vehicle can use different wiring and network messages from one year to the next. Because every vehicle differs, there are no “universal” audio upgrades. No single component can be swapped without considering the whole system.

Measuring Electrical Signals Is the Technician’s First Step

A professional’s first step is measuring what the factory system actually sends to each speaker, because factory signal processing shapes what every speaker wire carries. Factory amplifiers often apply equalization and crossovers before the signal reaches the speakers. A channel feeding a door tweeter may already be high-passed, so it carries no bass. Some factory systems also reduce bass as volume rises. Connect a new amplifier or digital signal processor (DSP) without knowing this, and it will faithfully reproduce the factory’s limitations.

Proper Integration is Critical to Car Audio Upgrades
An OEM integration processor such as the JL Audio FiX 86 accepts the factory system’s speaker-level signals, recombines channels the factory split apart and equalizes the result to a flat response before it reaches the new amplifier.

Using test tones and measurement tools, the technician sees the frequency range and level on every output, then chooses and sets up equipment that receives a signal it can use. In many cases, a DSP can recombine those split channels and correct the factory equalization before the signal reaches the new amplifier.

Proper Integration is Critical to Car Audio Upgrades

Speaker impedance is a separate measurement, and it matters just as much. Some factory premium systems use speakers rated below the 4 ohms typical of aftermarket models, often 2 ohms. Ohm’s Law states that voltage (measured in volts) equals current multiplied by resistance. The related power formula, P = V²/R, explains the problem: An amplifier swinging 10 volts delivers 50 watts into 2 ohms but only 25 watts into 4 ohms. Halving the power costs about 3 dB, a drop most listeners can hear. Pair 4-ohm aftermarket speakers with a factory amplifier designed for 2-ohm loads, and the system can play quieter than before, even though the speakers are better. Skipping these measurements turns the upgrade into guesswork.

Ask About Installation Standards

The best way to judge a retailer is to ask how it handles integration in your specific vehicle. Will the factory chimes, cameras and steering wheel controls be retained? How will the factory signal be measured before equipment is chosen? What interface modules or other parts will the vehicle need? Many factory radios have no RCA outputs, so ask how the shop will take the signal. Typically, an interface or processor accepts speaker-level signals.

Also ask about grounding. A ground completes the electrical circuit, and a good one is a solid connection to bare chassis metal. A poor ground typically causes noise, such as alternator whine that rises and falls with engine speed, along with voltage problems that can lead to product failures. Many retailers can show photographs of previous installations, which reveal their wiring standards.

Finally, request a demonstration. The product specialist can explain what you’re hearing, how it was accomplished and how it can be replicated in your vehicle, including how the factory features were retained. Use the BestCarAudio.com Dealer Locator to find a retailer equipped to measure and integrate with your vehicle’s factory system. Visit a local specialty retailer to find out more.

Featured image courtesy ZZ2.

Dealer Locator

Find a qualified retailer

Search authorized retailers by ZIP code.

Newsletter

Get the weekly newsletter

Plus a free buying guide of your choice. New reviews, product spotlights and upgrade ideas every week.

Get Your Free Guide